Trane 18 TruComfort™ Variable Speed Heat Pump (XV18)

Who This Unit Is For

The Trane Premiere 18 TruComfort™ is the heat pump we’d talk about when someone likes the idea of the 20 TruComfort™, but wants to bring the price down a bit. This model used to be called the Trane XV18.

The 18 TruComfort™ uses the same basic variable-speed comfort idea as the Premiere 20, but without the WeatherGuard™ Top and with slightly lower efficiency.

A Trane 18 TruComfort™ can make sense if you care about humidity control, quieter operation, longer runtimes, and better winter heating than a basic heat pump can usually deliver. Instead of turning on at full output and shutting off, this system can run at lower speeds for longer periods of time.

It’s probably the wrong fit if you just need a basic replacement and want to keep the price low. It’s also not the right unit if you want to use a simple thermostat or mix it with just any indoor equipment.

What you’re really buying here is most of the Premier-level Trane heat pump experience at a lower price than the 20 TruComfort™ with WeatherGuard™.

Key Features

• Energy Efficiency: Up to 18.1 SEER2 / 8.5 HSPF2
• Noise Level: 55–76 dB
• Heating and Cooling Stages: Fully Variable
• ENERGY STAR® qualified when matched with appropriate coil components
• Trane Link Control Board
• Liquid-cooled Inverter Drive
• Swept Fan Blade
• Spine Fin™ Coil
• Demand Defrost for Coil
• Climatuff™ Compressor
• Compressor Sound Insulators

Benefits

• Variable-speed heat pump performance at a lower price than the 20 TruComfort™ with WeatherGuard™
• Excellent humidity control compared to single-stage and multi-speed systems
• Longer, quieter runtimes
• Good fit for homeowners who want a Premier heat pump without choosing the top model
• Strong option for dual-fuel systems with compatible indoor equipment

Considerations

• Still a premium-price heat pump
• Does not include WeatherGuard™ Top
• Requires compatible Trane communicating indoor equipment
• Not as efficient as the 20 TruComfort™ with WeatherGuard™
• Service techs need the right training for communicating systems

What Our Service Department Says

The 18 TruComfort™ is the one we’d look at when someone wants the feel of a high-end Trane heat pump but does not necessarily need the top model.

You give up the WeatherGuard™ Top and some efficiency compared to the 20 TruComfort™ with WeatherGuard™, but you still get the main variable-speed benefit.

The tradeoff is that this is not a simple swap-in heat pump. It needs the right indoor equipment and the right controls. If someone is trying to keep their old furnace and thermostat no matter what, this may not be the right fit.

We also wouldn’t sell this as a cure-all for bad ductwork. A variable-speed system can help a lot, but it still needs good airflow.

Pricing

Our average price for selling and installing a Trane 18 TruComfort™ Variable Speed Heat Pump is between $10,300 to $13,300. This price includes installation and a matching indoor coil.

Smaller units with easier installations are usually closer to the lower end. Larger units, communicating equipment upgrades, electrical work, ductwork changes, or tougher access can push the project toward the higher end.

The main comparison is usually between the 18 TruComfort™ and the Trane 20 TruComfort™ Variable Speed Heat Pump with WeatherGuard™. The 20 TruComfort™ with WeatherGuard™ is the more complete top-of-the-line option.

Get a free quote for your home here.

Compatible Furnaces

The 18 TruComfort™ Variable Speed Heat Pump needs compatible Trane communicating indoor equipment. This is not the type of heat pump we’d normally pair with a basic single-stage furnace and a standard thermostat.

We often recommend this system with a compatible Trane communicating air handler or gas furnace, such as the Trane TAMX Hyperion Air Handler or the Trane XC95m Gas Furnace. The right match depends on your home, ductwork, utility setup, and whether you’re replacing the indoor equipment at the same time.

Warranty

• 12-year limited warranty on compressor
• 10-year limited warranty on coil and other functional parts

Installation

With the 18 TruComfort™, the installation has to be treated like a full system design, not just an outdoor unit replacement.

If the 18 TruComfort™ makes sense, we’ll explain why. If the 20 TruComfort™ with WeatherGuard™ is worth the upgrade, we’ll walk through that too. And if a lower-priced multi-speed or single-stage heat pump is a better fit for your home, we’ll tell you that instead.

Book an appointment online today.

Model Number Data

Below are the model numbers for the Trane 18 TruComfort™ Variable Speed Heat Pump. These models use R-454B refrigerant.