Trane 13 Single-Stage Air Conditioner (XR13)

Who This Unit Is For

At the lowest price point, the Trane 13 Single-Stage Air Conditioner is the budget option in Trane’s current A/C lineup. This model used to be called the Trane XR13.

It’s the unit we recommend when keeping the price low matters more than getting the most efficient or advanced system.

A Trane 13 Single-Stage is often the right fit for small homes, rental properties, or houses you plan to sell within the next few years. It can also make sense when your old system fails suddenly and you just need cooling fast without wanting to drop a ton of money.

It’s probably the wrong fit if you run your A/C heavily from May through September, care a lot about humidity control, or have rooms in your house that already struggle to stay comfortable.

What you’re really buying here is the core Trane tech without the premium features and controls that the higher-end models have.

Key Features

• Energy Efficiency: Up to 13.4 SEER2
• Noise Level: 71–72 dB
• Speeds: One
• Fan Stages: One
• R-454B Refrigerant
• Lower Global Warming Potential
• Climatuff™ compressor
• Spine Fin™ condenser coil
• Full-sided galvanized steel louvered panels
• DuraTuff™ rust-proof basepan
• Optional WeatherGuard™ Top

Benefits

• Lowest installed price in Trane’s air conditioner lineup
• Simple single-stage cooling
• Good fit for rentals, smaller homes, and budget-focused replacements
• Uses Trane’s Spine Fin™ coil and Climatuff™ compressor
• Optional WeatherGuard™ Top available

Considerations

• Less efficient than higher-end Trane air conditioners
• Less humidity control than multi-speed or variable-speed systems
• Not as quiet as Trane’s higher-end systems
• WeatherGuard™ Top is not included
• Not usually the best long-term value if you use your A/C heavily every summer

What Our Service Department Says

Don’t oversize it. That’s the biggest thing with a single-stage A/C. If it’s too big, it can cool the house fast, shut off too soon, and leave you with a house that feels cool but still humid.

The nice thing about this model is that it’s simple. There aren’t as many expensive controls involved as you’d have on a high-end variable-speed system.

Keep the coil clean, make sure it has enough airflow, and have it installed right from the start. That matters more on this unit than trying to squeeze a bunch of fancy features out of it.

Pricing

Our average price for selling and installing a Trane 13 Single-Stage Air Conditioner is between $3,800 to $6,000.

Smaller units with easier installations are usually closer to the lower end. Larger units or tougher install projects with electrical, ductwork, or access issues may end up near the higher end.

If it fits your home’s needs, then the cost savings can make it a really smart buy. If you plan to stay in your home for a long time, it’s worth comparing the cost difference against the Trane 14 Single-Stage Air Conditioner or a higher-efficiency model.

Get a free quote for your home here.

Compatible Furnaces

This air conditioner pairs well with basic indoor furnaces. We often match this A/C with the Trane S8X1 or Trane S9X1 gas furnace.

For a tailored recommendation, our comfort advisors will look at your goals and home setup before choosing the right indoor unit to match your air conditioner.

Warranty

• 10-year limited warranty on coil and other functional parts

Installation

Our free in-home estimates include a review of your current system, ductwork, equipment location, and comfort concerns. The goal isn’t just to replace the box outside.

We train our team to give honest, pressure-free advice. So if this single-stage A/C is enough for your home, we’ll tell you. If spending more on the next model up makes more sense, we’ll explain why.

Book an appointment online today.

Model Number Data

Below are the model numbers for the Trane 13 Single-Stage Air Conditioner. These models use R-454B refrigerant.